Variable pressure mattress with compressor, the 18 air cells are supplied with air through two airways (even and odd ducts in the same airway). One half of the air cells and after 4 minutes the other half will be at the hardness corresponding to the set pressure. This ensures that each part of the body is only pressurised for a maximum of 4 minutes, after which it is unloaded to improve circulation.
- Treatment of stage I-IV bloating
- Can be used long term and for home use
- The aim is to reduce the pressure on the body surface with a gentle massage, which improves circulation and oxygenation of the blood.
- Adequate effect between 50-130kg
Technical data:
Compressor:
- Power supply: 230V~ -50Hz
- Air output: 5 litres/min
- Pressure range: 40 mmHg ÷ 120 mmHg
- Cycle time: 8 minutes (4 minutes for one airway and 4 minutes for the other airway)
- Power consumption: 10W
- Noise level at 1 m: 46 dbII
- Protection: F500 mA fuse
- Size: 265(H)mm x 125 (W)mm x 105(D)mm
- Weight: 1.4kg
Mattress:
- Size: 182cmx80cm
- Mattress thickness: 12 cm when inflated
- Material: PVC/NYLON
- Weight: 3,6kg
- Compressor connection with special tube
- User weight : 50kg- 130kg
- Fitted with PU blanket
Before use, make sure that the pipes are not broken or twisted. Place the flat surface at both ends of the mattress under the bed's own mattress. Connect the two tubes of the mattress to the compressor.
Set the regulator on the compressor to maximum. In 45 minutes the mattress will be fully inflated.
Always use a sheet between the mattress and the patient.
Set the pressure regulator to the desired setting according to the patient's weight
